Calling reconnect() simultaneously from multiple threads (like when
using XEP-0199 keepalive) could break because the connection state
can transition and break the state expectations in one of the
reconnect() calls.
Note that using % in a string will _always_ perform the sting substitutions, because the strings are constructed before the function is called. So log.debug('%s' % expensiveoperation()) will take about the same CPU time whether or not the logging level is DEBUG or INFO. if you use , no substitutions are performed unless the string is actually logged
Note that using % in a string will _always_ perform the sting substitutions, because the strings are constructed before the function is called. So log.debug('%s' % expensiveoperation()) will take about the same CPU time whether or not the logging level is DEBUG or INFO. if you use , no substitutions are performed unless the string is actually logged
The processing loop was continuing to call __read_xml after </stream>
was received, which caused SyntaxErrors (can't find starting element).
This should fix issue #102
May be disabled by setting:
self.whitespace_keepalive = False
The keepalive interval can be adjusted using:
self.whitespace_keepalive_interval = 300
The default interval is 5min.
If wait=True, then the disconnect call will block until
the send queue has emptied.
WARNING: Using wait=True when more stanzas are being added to the
queue than can be processed such that the queue is never empty
will cause the disconnect call to block indefinitely without actually
disconnecting.
The error bubbles through the event processing loop, breaking it and
hanging the application.
Instead, there is now a .exception(e) method on XMLStream which may
be overridden or reassigned that will receive all unhandled exceptions
(read: not XMPPError) from event and stream handlers.
If a stanza handler raised an exception, the exception was processed
and replied by the modified stanza, not a stanza with the original
content.
A copy is now made before handler processing, and if an exception occurs
it is the copy that processes the exception using the original content.
For now, session_end is the same as disconnected, but once support is
added later for stream management, the two events will become distinct.
Plugins should add handlers for session_end for cleaning any session
state.
Backoff was only being done for the initial connection attempt
before. Now any reconnection will start with a minimum 1 sec
delay which will approximately double between attempts.
JIDs with Unicode values were being encoded by the JID class
instead of leaving them as just Unicode strings.
It may still be a good idea to use
from __future__ import unicode_literals
pretty much everywhere though.
Fixes issue #88.
Each interface, say foo, may be overridden in three ways:
set_foo
get_foo
del_foo
To declare an override in a plugin, add the class field
overrides as so:
overrides = ['set_foo', 'del_foo']
Each override must have a matching set_foo(), etc method
for implementing the new behaviour.
To enable the overrides for a particular parent stanza,
pass the option overrides=True to register_stanza_plugin.
register_stanza_plugin(Stanza, Plugin, overrides=True)
Example code:
class Test(ElementBase):
name = 'test'
namespace = 'testing'
interfaces = set(('foo', 'bar'))
sub_interfaces = set(('bar',))
class TestOverride(ElementBase):
name = 'test-override'
namespace = 'testing'
plugin_attrib = 'override'
interfaces = set(('foo',))
overrides = ['set_foo']
def setup(self, xml):
# Don't include an XML element in the parent stanza
# since we're adding just an attribute.
# If adding a regular subelement, no need to do this.
self.xml = ET.Element('')
def set_foo(self, value):
print("overrides!")
self.parent()._set_attr('foo', 'override-%s' % value)
register_stanza_plugin(Test, TestOverride, overrides=True)
Example usage:
>>> t = TestStanza()
>>> t['foo'] = 'bar'
>>> t['foo']
'override-bar'
ElementBase instances will display the top-most namespace by default.
StanzaBase instances will NOT display the top-most namespace by default.
May pass True or False to __str__ to override.
Now done more responsibly, saving any existing signal handlers
and calling them when an interrupt occurs in addition to the
one Sleek installs.
NOTE: You may need to explicitly use "kill <process id>" in
order to trigger the proper signal handler execution, and
to raise the "killed" event.
Waiting until the actual run step means that the handler is not
marked for deletion when checked in the __spawn_event() thread,
causing the callback to stay in the handler list.
This allows exceptions to include the original
content of a stanza in the error response by including
the parameter clear=False when raising the exception.
Will now always show top-level namespace, unless it is the same
as the stream's default namespace. Also added the XMPP stream
namespace to the namespace map as 'stream'.
Use stanza.values instead of _get/set_stanza_values where used.
ElementBase stanzas can now use .tag
May use class method tag_name() for stanza classes.
ElementBase now has .clear() method.
May now use register_stanza_plugin(Foo, Bar, iterable=True)
to add to the set of stanza classes used for iterable
substanzas. It is no longer necessary to manually specify
the contents of subitem if the new method is used.
A stanza object may add is_extension = True to its class definition
to provide a single new interface to a parent stanza.
For example:
import sleekxmpp
from sleekxmpp import Iq
from sleekxmpp.xmlstream import ElementBase, register_stanza_plugin, ET
class Foo(ElementBase):
"""
Test adding just an attribute to a parent stanza.
Adding subelements works as expected.
"""
is_extension = True
interfaces = set(('foo',))
plugin_attrib = 'foo'
def setup(self, xml):
# Don't include an XML element in the parent stanza
# since we're adding just an attribute.
# If adding a regular subelement, no need to do this.
self.xml = ET.Element('')
def set_foo(self, val):
self.parent()._set_attr('foo', val)
def get_foo(self):
return self.parent()._get_attr('foo')
def del_foo(self):
self.parent()._del_attr('foo')
register_stanza_plugin(Iq, Foo)
i1 = Iq()
i2 = Iq(xml=ET.fromstring("<iq xmlns='jabber:client' foo='bar' />"))
>>> i1['foo'] = '3'
>>> i1
'3'
>>> i1
'<iq id="0" foo="3" />'
>>> i2
'<iq id="0" foo="bar" />'
>>> i2['foo']
'bar'
>>> del i2['foo']
>>> i2
'<iq id="0" />'
Daemonized threads exit once the main program has quit,
and the only threads left running are all daemon threads.
Should fix hanging clients while not trampling over anyone
else's signal handlers.
Support is only for adding literal XML content
to stanzas. Full support for things like multiple
message bodies with different xml:lang values is
still in the works.
SleekTest can now use matchers when checking stanzas, using
the method parameter for self.check(), self.recv(), and self.send():
method='exact' - Same behavior as before
'xpath' - Use xpath matcher
'id' - Use ID matcher
'mask' - Use XML mask matcher
'stanzapath' - Use StanzaPath matcher
recv_feature and send_feature only accept 'exact' and 'mask' for now.
* check_stanza does not require stanza_class parameter. Introspection!
* check_message, check_iq, and check_presence removed -- use check
instead.
* stream_send_stanza, stream_send_message, stream_send_iq, and
stream_send_presence removed -- use send instead.
* Use recv instead of recv_message, recv_presence, etc.
* check_jid instead of check_JID
* stream_start may accept multi=True to return a new SleekTest instance
for testing multiple streams at once.
xep_0030 still referenced event_handlers. Added the method event_handled
which will return the number of registered handlers for an event to
resolve the issue.
Setting signal handlers from inside a thread is not supported in Python,
but some applications need to run Sleek from a child thread.
SleekXMPP applications that run inside a child thread will NOT be able
to detect SIGHUP or SIGTERM events. Those must be caught and managed by
the main program.
Made setting the SIG* handlers conditional on if the signal defined for
the OS.
Added the attribute ssl_version to XMLStream to set the version of SSL
used during connection. It defaults to ssl.PROTOCOL_TLSv1, but OpenFire
tends to require ssl.PROTOCOL_SSLv23.
Raising an XMPPError exception from an event handler now works, even if
from a threaded handler.
Added stream tests to verify.
We should start using XMPPError, it really makes things simple!
Stanza objects now accept the use of underscored names.
The CamelCase versions are still available for backwards compatibility,
but are discouraged.
The property stanza.values now maps to the old getStanzaValues and
setStanzaValues, in addition to _set_stanza_values and
_get_stanza_values.
Implemented ANONYMOUS authentication on the ClientXMPP class.
To use it, you just need to provide a domain (e.g 'anon.example.com')
with an optional resource (e.g 'anon.example.com/resource') as the JID,
with no password. The JID class has been improved to accept
domains as fulljid.
You can test this with echo_client.py
python echo_client.py -j anon.louiz.org/ # anonymous with a resource
# defined by the server
python echo_client.py -j anon.louiz.org/resource # anonymous with given
# resource
The "normal" authentication method still works exactly like before.
Moved SleekTest to sleekxmpp.test package.
Corrected error in XML compare method.
Added TestLiveSocket to run stream tests against live streams.
Modified XMLStream to work with TestLiveSocket.
This prepares the way for moving add_handler to XMLStream.
Since stanzas, matchers, and handlers in any XML stream will typically
use unique IDs, XMLStream is a good place for these methods.
Updated XMLStream to return True or False from removeHandler to indicate if the handler
existed and was removed.
Waiter handlers now unregister themselves after timing out.
_setSubText can now handle elements specified by an XPath expression, and
will build up the element tree as needed, reusing an existing elements in
the path.
Now uses the xmlns and stream parameters to reduce the number of
extra xmlns attributes used in the logging output.
Added self.default_ns to XMLStream just to be safe.
The sleekxmpp.xmlstream.tostring and sleekxmpp.xmlstream.tostring26 packages
have been merged to sleekxmpp.xmlstream.tostring. The __init__.py file will
import the appropriate tostring function depending on the Python version.
The setup.py file has been updated with the package changes.
ElementBase is now a direct descendent of object and does not subclass ToString.
Stanza objects now return their XML contents for __repr__.
